| RFQ/OBP543/2024/25 |
Request for Quote |
service of transformers and mini-sub |
1 1000kVA Transformer Serial No's 0/5870/1/1 & 0/5870/1/2 2 11000/400V MAIN Clean Transformer Service Seal leaks Change oil 2 500kVA Transformer Serial No. 41992 1 11000/400V BOILER Clean Transformer Service Seal leaks Change oil 3 100kVA Mini Substation Serial No. M7469/1 1 11000/400V COLDROOM Clean Transformer Take Oil Sample, test for kV, Moisture, DGA, PCB and Furanics Attend to Minor Leaks (To Report ONLY on Major) Take After Sample for Analysis (kV & Moisture) repaint with original Colour Service and Test Hawker Siddeley Tiger Switch 4 630kVA Mini Substation Serial No. M6103 1 1 11000/400V EA Clean Transformer Attend to Minor Leaks (To Report ONLY on Major) Change oil repaint with original Colour Service and Test Hawker Siddeley Tiger Switch, including oil Change 5 11kV Substation SWITCH GEAR MAIN & BOILER 2 Clean Panels and Substation Room Service and Test Actom SBV4 Breakers Service includes : Contact Resistance test, AC Pressure test, cleaning, Lubrication and inspection of operating Mechanism. Breaker Speed test and Secondary Injection Testing. Replace indicator lights (change MV fuses if necessary) 6 Service and test Battery Tripping Units, check charge Rate (change battery) 2 |
1 1000kVA Transformer Serial No's 0/5870/1/1 & 0/5870/1/2 2 11000/400V MAIN Clean Transformer Service Seal leaks Change oil 2 500kVA Transformer Serial No. 41992 1 11000/400V BOILER Clean Transformer Service Seal leaks Change oil 3 100kVA Mini Substation Serial No. M7469/1 1 11000/400V COLDROOM Clean Transformer Take Oil Sample, test for kV, Moisture, DGA, PCB and Furanics Attend to Minor Leaks (To Report ONLY on Major) Take After Sample for Analysis (kV & Moisture) repaint with original Colour Service and Test Hawker Siddeley Tiger Switch 4 630kVA Mini Substation Serial No. M6103 1 1 11000/400V EA Clean Transformer Attend to Minor Leaks (To Report ONLY on Major) Change oil repaint with original Colour Service and Test Hawker Siddeley Tiger Switch, including oil Change 5 11kV Substation SWITCH GEAR MAIN & BOILER 2 Clean Panels and Substation Room Service and Test Actom SBV4 Breakers Service includes : Contact Resistance test, AC Pressure test, cleaning, Lubrication and inspection of operating Mechanism. Breaker Speed test and Secondary Injection Testing. Replace indicator lights (change MV fuses if necessary) 6 Service and test Battery Tripping Units, check charge Rate (change battery) 2 |
2025/03/10 11:00:00 |
No |
2025/03/16 15:00:00 |
| RFQ/OBP163/2025/26 |
Request for Quote |
Supply and delivery of Air-conditioning Units |
2 x 26000 BTU split unit's inverter 3 x 36000 BTU Split units inverter 2 x 36000 BTU potable units inverter 14 x 24000 BTU Split unit inverter |
2 x 26000 BTU split unit's inverter 3 x 36000 BTU Split units inverter 2 x 36000 BTU potable units inverter 14 x 24000 BTU Split unit inverter |
No |
2025/09/25 15:00:00 |
| RFQ/OBP345/2024/25 |
Request for Quote |
(PMI-RMP) Risk Management Professional Training |
Location –Can be at the supplier’s Training centre or online. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: PMI Scheduling Professional (PMI-SP) ® Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. Exam and registration fee to be included in the cost |
Location –Can be at the supplier’s Training centre or online. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: PMI Scheduling Professional (PMI-SP) ® Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. Exam and registration fee to be included in the cost |
No |
2024/10/03 15:00:00 |
| RFQ/OBP431/2024/25 |
Request for Quote |
(PMI-RMP) Risk Management Professional Training |
Training Provider –Project Management Institute (PMI) Authorized Partner Location –Can be at the supplier’s Training centre or online. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: PMI Risk Management Professional (PMI-RMP)® Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. Exam and registration fee to be included in the cost |
Training Provider –Project Management Institute (PMI) Authorized Partner Location –Can be at the supplier’s Training centre or online. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: PMI Risk Management Professional (PMI-RMP)® Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. Exam and registration fee to be included in the cost |
No |
2024/12/01 15:00:00 |
| RFQ/OBP439/2024/25 |
Request for Quote |
1 ML explorer multichannel pipette tips |
They are ideal for repetitive tasks in experiments, such as performing assays, serial dilutions, or sample preparation in molecular biology, drug discovery, and diagnostic labs. |
They are ideal for repetitive tasks in experiments, such as performing assays, serial dilutions, or sample preparation in molecular biology, drug discovery, and diagnostic labs. |
No |
2025/03/23 15:00:00 |
| RFQ/OBP439/2024/25 |
Request for Quote |
1 ML explorer multichannel pipette tips |
Procurement Description:They are ideal for repetitive tasks in experiments, such as performing assays, serial dilutions, or sample preparation in molecular biology, drug discovery, and diagnostic labs. |
Procurement Description:They are ideal for repetitive tasks in experiments, such as performing assays, serial dilutions, or sample preparation in molecular biology, drug discovery, and diagnostic labs. |
No |
2024/12/04 15:00:00 |
| RFQ/OBP189/2025/26 |
Request for Quote |
10 LITERS OF NEODISHER LABOCLEAN FLA SOLUTION |
Neodisher Laboclean is used in laboratories, medical facilities, and pharmaceutical industries for thorough cleaning and disinfection of surfaces, equipment, and instruments to maintain hygiene and prevent contamination. |
|
No |
2025/10/06 15:00:00 |
| RFQ/OBP024/2025/26 |
Request for Quote |
10 ML Sterile Plastic Bottles for Diluent |
See attached specifications |
See attached specifications |
No |
2025/05/02 15:00:00 |
| RFQ/OBP026/2025/26 |
Request for Quote |
100 ML Sterile Plastic Bottles for Diluent |
See attached specifications |
See attached specifications |
No |
2025/05/02 15:00:00 |
| RFQ /OBP523/2024/25 |
Request for Quote |
12 cell 219A/H Forklift battery |
See specifications |
See specifications |
No |
2025/02/25 15:00:00 |
| RFQ/OBP057/2025/26 |
Request for Quote |
12 cell 219A/H Forklift battery |
See attached specifications |
See attached specifications |
No |
2025/06/15 15:00:00 |
| RFQ/OBP429/2024/25 |
Request for Quote |
12V 45A/H BATTERIES |
Current batteries have reached shelf life. |
Current batteries have reached shelf life. |
No |
2024/12/01 15:00:00 |
| RFQ/OBP503/2024/25 |
Request for Quote |
13 Raw Material personnel to be trained on ISO 17025 accreditation. |
The Raw Material team will be undergoing training on ISO 17025 accreditation. This training will equip the personnel with the necessary knowledge and skills to understand and implement the standard effectively within our processes. |
The Raw Material team will be undergoing training on ISO 17025 accreditation. This training will equip the personnel with the necessary knowledge and skills to understand and implement the standard effectively within our processes. |
No |
2025/02/19 15:00:00 |
| RFQ/OBP010/2025/26 |
Request for Quote |
15RFQ lab consumables |
5 packs Cryovials (50 per pack) Type: Internal threading, freestanding Cap type: Internal screwcap with silicone seal, natural Volume: 2.0 ml Graduation marking: 1.0 ml and 1.8ml Material: Polypropylene Packaging: Packed in resealable safety lock bags Sterility: Sterile (gamma irradiated) DNase free and RNase free Endotoxin free Label detail: white marking area Temperature ranges from -196°C to + 121°C 15 packs Pipette tips (100 per packs) Make: Polypropylene, Volume: 0.5 – 5 ml with maximum volume of 5 ml Non-sterile DNase free RNase free Barrier: no Disposable Endotoxin free Filter: no Graduation: no Temperature ranges from -190°C - 140°C 10 bags Falcon Conical Centrifuge tubes (25 tubes/ bag) Cap type: Polyethylene flat top screw cap Volume: 15ml Bottom style: conical Graduation marking: 2-14ml Material: Clear Polypropylene Packaging: Packed in resealable safety lock bags Sterility: Sterile (gamma irradiated) DNase free and RNase free Noncytotoxic and nonpyrogenic Label detail: white marking area Disposable 3000 x g RCF |
5 packs Cryovials (50 per pack) Type: Internal threading, freestanding Cap type: Internal screwcap with silicone seal, natural Volume: 2.0 ml Graduation marking: 1.0 ml and 1.8ml Material: Polypropylene Packaging: Packed in resealable safety lock bags Sterility: Sterile (gamma irradiated) DNase free and RNase free Endotoxin free Label detail: white marking area Temperature ranges from -196°C to + 121°C 15 packs Pipette tips (100 per packs) Make: Polypropylene, Volume: 0.5 – 5 ml with maximum volume of 5 ml Non-sterile DNase free RNase free Barrier: no Disposable Endotoxin free Filter: no Graduation: no Temperature ranges from -190°C - 140°C 10 bags Falcon Conical Centrifuge tubes (25 tubes/ bag) Cap type: Polyethylene flat top screw cap Volume: 15ml Bottom style: conical Graduation marking: 2-14ml Material: Clear Polypropylene Packaging: Packed in resealable safety lock bags Sterility: Sterile (gamma irradiated) DNase free and RNase free Noncytotoxic and nonpyrogenic Label detail: white marking area Disposable 3000 x g RCF |
No |
2025/04/15 15:00:00 |
| OBP435/2024/25 |
Request for Quote |
2 L Flat bottom Boiling flasks |
Flat bottom Boiling flasks Borosilicate or pyrex glass Heat up to 134 oC and chemical resistance 50 x 2L flat bottom boiling flasks Approx neck OD: 42mm Colour: Clear |
Flat bottom Boiling flasks Borosilicate or pyrex glass Heat up to 134 oC and chemical resistance 50 x 2L flat bottom boiling flasks Approx neck OD: 42mm Colour: Clear |
No |
2024/12/01 15:00:00 |
| RFQ/OBP451/2024/25 |
Request for Quote |
2 x 10” 316L SANITARY HOUSING CODE 3 WITH BRACKET/LEGS |
PRODUCT NAME: 10” 316L SANITARY HOUSING CODE 3 WITH BRACKET/LEGS Materials of Construction 316L Length Less than 600mm Filter size to fit 10” code 3 Inlet/Outlet 1 ½”” Tri-clover Max Operating Pressure 10 bars Max.Operating Temperature 150°C Seal Material EPDM, Silicone or Viton Closure Type Quick release Clamp and Tee bar Bracket /legs for standing Required Surface finish 0.8μm Ra mechanically polished inside and out + final Electropolish Vent connections Required Filter adaptor type Code 7 Drawing requirement Required Availability of spares Required Unique serial number Required Documentation pack for traceability Required |
PRODUCT NAME: 10” 316L SANITARY HOUSING CODE 3 WITH BRACKET/LEGS Materials of Construction 316L Length Less than 600mm Filter size to fit 10” code 3 Inlet/Outlet 1 ½”” Tri-clover Max Operating Pressure 10 bars Max.Operating Temperature 150°C Seal Material EPDM, Silicone or Viton Closure Type Quick release Clamp and Tee bar Bracket /legs for standing Required Surface finish 0.8μm Ra mechanically polished inside and out + final Electropolish Vent connections Required Filter adaptor type Code 7 Drawing requirement Required Availability of spares Required Unique serial number Required Documentation pack for traceability Required |
No |
2024/12/04 15:00:00 |
| RFQ/OBP436/2024/25 |
Request for Quote |
250ml Erlenmeyer flask |
Erlenmeyer flask Narrow neck 250ml Borosilicate or pyrex glass Heat up to 134 oC and chemical resistance |
Erlenmeyer flask Narrow neck 250ml Borosilicate or pyrex glass Heat up to 134 oC and chemical resistance |
No |
2024/12/01 15:00:00 |
| RFQ/OBP020/2025/26 |
Request for Quote |
3 x Maximum and minimum temperature logger |
• Portable • Digital display • Cable length: ±1 meter • • Calibration certificates are compulsory. • Temperature: ± -40°C to ± 70°C |
• Portable • Digital display • Cable length: ±1 meter • • Calibration certificates are compulsory. • Temperature: ± -40°C to ± 70°C |
No |
2025/04/24 15:00:00 |
| RFQ/OBP042/2025/26 A |
Request for Quote |
300kg Topside / lean mince not exceeding 5% fat |
300 kg topside / lean mince not exceeding 5% fat |
300 kg topside / lean mince not exceeding 5% fat |
No |
2025/06/23 15:00:00 |
| RFQ/OBP042/2025/26 |
Request for Quote |
300kg Topside / lean mince not exceeding 5% fat |
300 kg topside / lean mince not exceeding 5% fat |
300 kg topside / lean mince not exceeding 5% fat |
No |
2025/05/25 15:00:00 |
| RFQ/OBP023/2025/26 |
Request for Quote |
5 ML Sterile Plastic Bottles for Diluent |
See attached specifications |
See attached specifications |
No |
2025/05/02 15:00:00 |
| RFQ/OBP426/2024/25 |
Request for Quote |
50 ml individually wrapped combitips |
They are especially useful when dispensing the same volume multiple times, as they reduce manual pipetting steps, enhancing efficiency and accuracy while minimizing contamination risk. |
They are especially useful when dispensing the same volume multiple times, as they reduce manual pipetting steps, enhancing efficiency and accuracy while minimizing contamination risk. |
No |
2024/12/01 15:00:00 |
| RFQ/OBP426/2024/25 |
Request for Quote |
50 ml individually wrapped combitips |
They are especially useful when dispensing the same volume multiple times, as they reduce manual pipetting steps, enhancing efficiency and accuracy while minimizing contamination risk. |
They are especially useful when dispensing the same volume multiple times, as they reduce manual pipetting steps, enhancing efficiency and accuracy while minimizing contamination risk. |
No |
2025/03/30 15:00:00 |
| RFQ/OBP025/2025/26 |
Request for Quote |
50 ML Sterile Plastic Bottles for Diluent |
See attached specifications |
See attached specifications |
No |
2025/05/02 15:00:00 |
| RFQ/OBP491/2024/25 |
Request for Quote |
50 x 50L TANK VENT 0.2MIC STERILE PFTE MEMBANE |
PRODUCT NAME: 50L TANK VENT 0.2MIC STERILE PFTE MEMBANE Type of material Final filter Membrane: PTFE Fleece material Polypropylene -In-Line Steam sterilizable & autoclavable) Pore Size 0.2 μm Max. Allowable Operating pressure 5.5 bar (liquid) at 20 Deg C 4.1 bar (gas)bar at 20 Deg C Max. Allowable Back Pressure 2.7 bar | 29 psi at 20°C End Caps: Polypropylene Polypropylene Core material: Polypropylene Capsule/Cartridge Housing: Polypropylene Polypropylene O-Ring: Silicone (other materials on request) N/A Maximum length – end to end 140mm Validation Certified to comply with DIN/ISO 9001 Standards Each individual element is tested for integrity by Bubble Point and Diffusion test/ and or Water Intrusion Test – Fully validated as sterilizing grade filters according to ASTM current F-838 guidelines – Designed, developed and manufactured in accordance with an ISO 9001 certified Quality Management System – Meet or exceed the requirements for WFI quality standards set by the current USP Non pyrogenic according to USP Bacterial Endotoxins – USP Plastic Class VI Test – Non fiber releasing according to 21 CFR Filter adaptor type ½” BSPP Male Appearance Small white Capsule filter with TC connections inlet/outlet and vent/drain valves on unsterile side |
PRODUCT NAME: 50L TANK VENT 0.2MIC STERILE PFTE MEMBANE Type of material Final filter Membrane: PTFE Fleece material Polypropylene -In-Line Steam sterilizable & autoclavable) Pore Size 0.2 μm Max. Allowable Operating pressure 5.5 bar (liquid) at 20 Deg C 4.1 bar (gas)bar at 20 Deg C Max. Allowable Back Pressure 2.7 bar | 29 psi at 20°C End Caps: Polypropylene Polypropylene Core material: Polypropylene Capsule/Cartridge Housing: Polypropylene Polypropylene O-Ring: Silicone (other materials on request) N/A Maximum length – end to end 140mm Validation Certified to comply with DIN/ISO 9001 Standards Each individual element is tested for integrity by Bubble Point and Diffusion test/ and or Water Intrusion Test – Fully validated as sterilizing grade filters according to ASTM current F-838 guidelines – Designed, developed and manufactured in accordance with an ISO 9001 certified Quality Management System – Meet or exceed the requirements for WFI quality standards set by the current USP Non pyrogenic according to USP Bacterial Endotoxins – USP Plastic Class VI Test – Non fiber releasing according to 21 CFR Filter adaptor type ½” BSPP Male Appearance Small white Capsule filter with TC connections inlet/outlet and vent/drain valves on unsterile side |
No |
2025/01/26 15:00:00 |
| RFQ/OBP355/2024/25 |
Request for Quote |
5ml Vaccine bottles |
Refer to specification's |
Refer to specification's |
No |
2024/10/07 15:00:00 |
| RFQ/OBP368/2024/25 |
Request for Quote |
5ML Vaccine bottles |
See specifications |
See specifications |
No |
2024/10/17 15:00:00 |
| RFQ/OBP453/2024/25 |
Request for Quote |
A TURNKEY PROCESS OF HEADHUNTING AND PLACEMENT OF AN EXPERT TO ADVISE ON COSTING OF INVENTORY AND A SUITABLE ERP SYSTEM |
See attached specifications |
See attached specifications |
No |
2024/12/11 15:00:00 |
| RFQ/OPB028/2025/26 |
Request for Quote |
Adhesive Silver Aluminium barcode tags for marking of assets |
Size should be not more than 44mm X 15mm Material: 0.5 mm thick anodized aluminium Font Colour; Black Numbering range: 11000 to 20000 Can be read by a scanner Superior resistance to chemicals, abrasion, solvents, extreme temperatures and UV label should be covered with a clear coating to prevent scratches damaging the printed image |
Size should be not more than 44mm X 15mm Material: 0.5 mm thick anodized aluminium Font Colour; Black Numbering range: 11000 to 20000 Can be read by a scanner Superior resistance to chemicals, abrasion, solvents, extreme temperatures and UV label should be covered with a clear coating to prevent scratches damaging the printed image |
No |
2025/05/06 15:00:00 |
| RFQ/OBP430/2024/25 |
Request for Quote |
Advance Project Management Training |
Training Provider –Project Management Institute (PMI) Authorized Partner Location –Can be at the supplier’s Training centre. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: Project Management Professional (PMP)® PMI Project Management Professional (PMI-PMP) Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. |
Training Provider –Project Management Institute (PMI) Authorized Partner Location –Can be at the supplier’s Training centre. Course Duration: Approved duration (Service provider to advise) Training site: Training provider to advise. Learning Materials Include study material & copy of presentation. Training Mode: Class based with case studies (Examples related to the respective functions/training material) Competency certificate: Project Management Professional (PMP)® PMI Project Management Professional (PMI-PMP) Certification exam required for demonstration of competency. Learning Outcome: Learners should be able to initiate, lead and complete the risk, time, human, cost and quality elements of complex and various projects. |
No |
2024/12/01 15:00:00 |
| RFQ/OBP065/2025/26 |
Request for Quote |
Advanced Ms Excel training - 4 delegates (2 departments) |
• Course manual • Exercises • Class Test • Certificate |
• Course manual • Exercises • Class Test • Certificate |
No |
2025/06/23 15:00:00 |
| RFQ/OBP339/2024/25 |
Request for Quote |
Advanced Training In Biopharmaceutical Technology Transfer |
Programme should include: 1. The landscape of TT 2. Facility and equipment fir for TT 3. Validation strategies and de-risking techniques 4. Regulatory considerations for TT 5. Operational Excellence in TT 6. Risk Management and Change control 7. Interdisciplinary collaboration and communication 8. Continuous improvement 9. Best practices and future trends Learning Outcome (Learners/Candidates should be able to): 1. Facilitate transfer of processes, technologies and knowledge between R7D and manufacturing site. 2. Understand best practices in the biopharmaceutical setting TT process 3. Have insights into the regulation regarding the biopharmaceutical setting TT process 4. Learn challenge management and control strategies to ensure successful TT projects. 5. Design criteria for measuring success between Sending and Receiving Units 6. Technology Transfer Process Flow and documentation 7. Technology Transfer documentation review |
Programme should include: 1. The landscape of TT 2. Facility and equipment fir for TT 3. Validation strategies and de-risking techniques 4. Regulatory considerations for TT 5. Operational Excellence in TT 6. Risk Management and Change control 7. Interdisciplinary collaboration and communication 8. Continuous improvement 9. Best practices and future trends Learning Outcome (Learners/Candidates should be able to): 1. Facilitate transfer of processes, technologies and knowledge between R7D and manufacturing site. 2. Understand best practices in the biopharmaceutical setting TT process 3. Have insights into the regulation regarding the biopharmaceutical setting TT process 4. Learn challenge management and control strategies to ensure successful TT projects. 5. Design criteria for measuring success between Sending and Receiving Units 6. Technology Transfer Process Flow and documentation 7. Technology Transfer documentation review |
No |
2024/10/01 15:00:00 |
| RFQ/OBP338/2024/25 |
Request for Quote |
Advanced Validation Training |
Training details Groups Dynamics – Quality Assurance Validation team. Course Duration: 5 days. Learning Materials Include study material /copy of presentation. Training Mode: Onsite / Offsite class based. Skills, knowledge and reflective learning outcomes 1. Application of V-model 2. Current Pharmaceutical industry practice URS design 3. CSV design and application 4. Current Process validation design and application 5. Analytical Instrument Qualifications 6. Cleaning validation and Process Validation lifecycle approach 7. Current pharmaceutical Utility systems 8. Implementation of CCS Strategy Temperature Mapping |
Training details Groups Dynamics – Quality Assurance Validation team. Course Duration: 5 days. Learning Materials Include study material /copy of presentation. Training Mode: Onsite / Offsite class based. Skills, knowledge and reflective learning outcomes 1. Application of V-model 2. Current Pharmaceutical industry practice URS design 3. CSV design and application 4. Current Process validation design and application 5. Analytical Instrument Qualifications 6. Cleaning validation and Process Validation lifecycle approach 7. Current pharmaceutical Utility systems 8. Implementation of CCS Strategy Temperature Mapping |
No |
2024/10/01 15:00:00 |
| RFQ/OBP055/2025/26 |
Request for Quote |
Agile Project Management Training |
• Digital accredited course material • Sample questions and Case Studies • Sample exam paper, answer and rationale sets • Examination fees |
• Digital accredited course material • Sample questions and Case Studies • Sample exam paper, answer and rationale sets • Examination fees |
No |
2025/06/15 15:00:00 |
| RFQ/OBP369/2024/25 |
Request for Quote |
AHS 1 Labels 2063/1 |
see specifications |
see specifications |
No |
2024/10/17 15:00:00 |
| RFQ/OBP370/2024/25 |
Request for Quote |
AHS 2 Labels 2063/2 |
See specifications |
See specifications |
No |
2024/10/17 15:00:00 |
| RFQ/OBP372/2024/25 |
Request for Quote |
AHS Carton 2063/12 |
see specification |
see specification |
No |
2024/10/17 15:00:00 |
| RFQ/OBP371/2024/25 |
Request for Quote |
AHS carton 2063/2 |
See specifications |
See specifications |
No |
2024/10/17 15:00:00 |
| RFQ/OBP112/2025/26 |
Request for Quote |
Air Conditioning and Refrigeration Technology Intermediate Training |
Outcomes Upon successful completion of this course the student will have the understanding of the intermediate aspects of refrigeration and air conditioning. Superheat measurement, setting and the importance there of, sub-cooling, LP and HP Pressure switch setting determination and actual setting on an installation, Basic refrigeration commissioning techniques and procedures. Types of refrigeration systems, types of air conditioning systems, evaporative coolers, air conditioning components, heating, critical charging, compressor testing, fault finding, drives and couplings. Students have the opportunity to further their studies. The range of study progresses through air conditioning and refrigeration to and including large central plants. Example of Skills Fault finding / basic commissioning / procedures on walk in fridges / freezer / air con units / critical charging / humidity / recovery of refrigerants/ servicing/ belt drives tensioning and alignment / couplings / bearings / various systems and their operation and application / controls and safety devices / vapour barriers. |
Outcomes Upon successful completion of this course the student will have the understanding of the intermediate aspects of refrigeration and air conditioning. Superheat measurement, setting and the importance there of, sub-cooling, LP and HP Pressure switch setting determination and actual setting on an installation, Basic refrigeration commissioning techniques and procedures. Types of refrigeration systems, types of air conditioning systems, evaporative coolers, air conditioning components, heating, critical charging, compressor testing, fault finding, drives and couplings. Students have the opportunity to further their studies. The range of study progresses through air conditioning and refrigeration to and including large central plants. Example of Skills Fault finding / basic commissioning / procedures on walk in fridges / freezer / air con units / critical charging / humidity / recovery of refrigerants/ servicing/ belt drives tensioning and alignment / couplings / bearings / various systems and their operation and application / controls and safety devices / vapour barriers. |
No |
2025/08/13 15:00:00 |
| RFQ/OBP519/2024/25 |
Request for Quote |
All in One Computer X 1 |
See attached specifications |
See attached specifications |
No |
2025/02/25 15:00:00 |
| RFQ/OBP013/2025/26 |
Request for Quote |
Animal Blood testing |
Test Animal Blood samples for different disease susceptibilities |
Test Animal Blood samples for different disease susceptibilities |
No |
2025/04/15 15:00:00 |
| RFQ/OBP075/2025/26 |
Request for Quote |
Animal Ethics Committee-Training (Regulatory Compliance requirement) |
Offer Regulatory Compliance Requirement to 10 OBP Animal Ethics Committee members |
Offer Regulatory Compliance Requirement to 10 OBP Animal Ethics Committee members |
No |
2025/07/03 15:00:00 |
| RFQ/OBP445/2024/25 |
Request for Quote |
Animal Pellets |
See attached specifications |
See attached specifications |
No |
2024/12/01 15:00:00 |
| RFQ/OBP/530/2024/25 |
Request for Quote |
Animal Pellets |
Sourcing Semi-Complete Ruminant and Riders Pellets |
Sourcing Semi-Complete Ruminant and Riders Pellets |
No |
2025/03/05 15:00:00 |
| RFQ/OBP074/2025/26 |
Request for Quote |
Animal scientist-Training for scientists in Animal research ethics (Regulatory Compliance requirement) |
Animal scientist-Training for scientists in Animal research ethics for 15 people |
Animal scientist-Training for scientists in Animal research ethics for 15 people |
No |
2025/07/03 15:00:00 |
| RFQ/OBP125/2025/26 |
Request for Quote |
Annual Service and calibration of Millrock Freeze dryer |
service/ calibration annual certificate, service sticker. Millrock freeze dryer is the product of Vacutec |
service/ calibration annual certificate, service sticker. Millrock freeze dryer is the product of Vacutec |
No |
2025/09/11 15:00:00 |
| RFQ/OBP473/2024/25 |
Request for Quote |
Annual Service and calibration of the Millrock Freeze dryer |
Service and calibration |
Service and calibration |
No |
2025/01/16 15:00:00 |
| RFQ/OBP552/2024/25 |
Request for Quote |
Annual service for the Sarto Flow Advance TFF system |
The Sarto Flow Advance TFF system, supplied by Sartorius in 2014, has never been serviced since its purchase. |
The Sarto Flow Advance TFF system, supplied by Sartorius in 2014, has never been serviced since its purchase. |
No |
2025/03/17 15:00:00 |
| RFQ/OBP552/2024/25 |
Request for Quote |
Annual service for the Sarto Flow Advance TFF system |
The Sarto Flow Advance TFF system, supplied by Sartorius in 2014, has never been serviced since its purchase. |
The Sarto Flow Advance TFF system, supplied by Sartorius in 2014, has never been serviced since its purchase. |
No |
2025/03/17 15:00:00 |
| RFQ/OBP152/2025/26 |
Request for Quote |
Annual Servicing and calibration of the Eppendorf Mastercycler - Serial number S34100139 |
Servicing and Calibration of an Eppendorf Mastercycler - S34100139 |
Servicing and Calibration of an Eppendorf Mastercycler - S34100139 |
No |
2025/09/11 15:00:00 |