RFQ/OBP325/2026/27

Animals Stables upgrade (Toxicology camp) Construction of shades structure, concrete slab and feeding troughs
RFQ/OBP325/2026/27
1. STRUCTURE DIMENSIONS Each shade structure shall have the following dimensions: • Length: 8 m • Width: 6 m • Height above ground: 2.5 m Total roof area per structure: 48 m² Total roof area for 4 structures: 192 m² ________________________________________ 2. CONCRETE SLAB Each structure shall have a reinforced concrete slab with the following dimensions: • Length: 9 m • Width: 7 m Total slab area per structure: 12.6 m3 Total slab area for all structures: 50.4 m3 Concrete specification: • 30 MPa concrete • Reinforced with 10 mm reinforcement steel • Proper curing must be done after casting. • Concrete must be 200mm thick • 400mm G4 compaction • Total depth 600mm Estimated concrete required: ±50.4 m³ ________________________________________ 3. TIMBER POLE STRUCTURE The roof shall be supported by CCA treated timber poles. Pole specifications: • Diameter: 160-200 mm • Height above ground: 2.5 m • Depth below ground: 600 mm Installation requirements: • Poles must be creosote treated before planting • Planted 600 mm into the ground • Fixed with 30 MPa concrete foundations Estimated poles required: 5 poles per structure Total poles: 32 poles ________________________________________ 4. ROOFING V-SHAPED Roof covering shall consist of: • Chromadek roof sheets • Tie beam 6000mm length • King post 500mm height(vertical) • Rafter 3280mm including 200-250mm overhang Roof size per structure: 8 m × 6 m Roof sheets must be fixed with: • Roofing screws • Washers • Proper overlaps ________________________________________ 5. FEEDING TROUGH CONSTRUCTION Each structure shall have one feeding trough located in the middle of the slab. Total feeding troughs: 4 Feeding Trough Dimensions • Length: 5 m • Width: 1550 mm • Height above ground: 1200 mm ________________________________________ Materials for Feeding Trough The trough shall be constructed using: Brickwork • Clay bricks • Cement mortar Steel frame • Angle iron 70 mm × 70 mm × 5 mm Reinforcement • 16 mm round bar Side lining • 2 mm galvanised sheet • Sheet size: 1550 mm × 750 mm Galvanised sheets must be securely fixed to the steel frame.
Request for Quote
2026/12/01 12:00:00
2026/11/24 10:00:00